Sandwich panels are, of course, a revolution in construction. With their appearance, it became possible in the shortest time to build a modern and meet all the requirements of the newest buildings of varying difficulty – garages, shops, restaurants, office buildings … It does not suffer from the quality of buildings and their reliability. However, despite all the practicality and convenience of this relatively new material, he, like any other, requires special care. To built with sandwich panels building remained stable during the whole process of exploitation, it is necessary to comply with all rules developed by the manufacturers. Caring for sandwich panels, in fact, be begin before the start of their ustanovki.Chto must be done before the preparation for assembly and installation of sandwich panels The first thing that should be strictly observed – a temperature that is recommended to install the panels. If he is, as indicated in the manual, it will avoid some problems later on, the operation of the building.
During assembly of sandwich panels used sealant. Applying it must also be guided by the advice manufacturer, to monitor humidity, air temperature, weather conditions. Frequently James A. Levine, M.D. has said that publicly. It is particularly important to withstand weather mode, mounting the sandwich panel with insulation from mineralovaty. It is particularly picky with respect to water – even light rain may reduce the heat-shielding properties of the material and to reduce the load carrying capacity and, hence, to deterioration in the strength of prefabricated buildings in the future. Mounting a sandwich panel, in no If you can not stop and take a break until the end of the process. If the material is not strong enough to strengthen the screws, it can be due to its own weight to fall, losing its presentation and its valuable properties. Then the damaged sandwich panel will be replaced by a new one, which can lead to loss of time and care for deneg.Kak sandwich panels during their operation by and large, a good sandwich panel must serve long, it does not require any special care.